Industrial noises can be a nuisance, but it’s a major part of the construction business. Without protection, you are putting yourself at risk for permanent hearing loss.

The sounds that come from operating heavy equipment is unavoidable, but you can protect your hearing. The potential to lose your hearing permanently is strong among those who are exposed to loud noises on a continuous basis.

Industrial workers should adhere to the guidelines for excessive noise prevention. These rules are significant to your safety and should be a part of an employer’s Standard Operating Procedures or SOP. Let’s discuss a few tips that reduce industrial machinery noise.

Determine Noise Source

Where does the noise come from?  We all know the answer to that – from the machine itself.  More to the point, it’s the gear driver units that drive us nuts.  While, it’s natural to experience some noise, the gear drive vibrates when it moves, hence the loud sounds.  I can’t count the times that I’ve been rudely awakened by the rattling sounds of a jackhammer.

The already blaring noise can reach extremely loud levels when key components of the machinery are out of sync.  Many things can go wrong in operations that increase noise aggravation.

Alterations and Repairs 

The potential for a gearbox to produce an astronomical amount of noise is because of the interaction between the different gears.  This is what produces much of the vibration that make you cringe. Did you know that there are certain restrictions that disallows the amount of reduction of gear noise?  However, there are a few ways in which you can reduce industrial machinery noise.

To prevent some of the annoyance, you should know that altering the form of the gear tooth could assist in relieving extreme levels of noise. Not surprising, the gear teeth, when worn excessively, can be the cause of the degree of noise.  The sides of the gear teeth should look the same.  If you notice that they are not, you should attempt contacting someone for repairs.

Now, if the idea of containing the noise appeals to you, there are ways of doing this.  Isolation and the installation of sound-absorbing barriers are two options.

1) You can isolate the sound, which is created during the movements of the gear drive on its mounting surface.  Reduction of noise is done by simply placing a volatile material in between the gear drive and the drive’s surface.  The result is that noise is reduced because the vibration has been restricted.

2) The noise can be brought to a minimum by installing sound barriers.  The panels are normally placed throughout an area where noises take place such as conference rooms and auditoriums.

Where to Get Help?

Acoustiblok is the place to go for all weather sound panels.  They are, without a doubt, guaranteed to take a beating from mother nature and the hammering results of the industrial world.  It withstands ultraviolet light, corrosion, rain, salt air and water, chlorine and more.  The sound absorbing panels can be manually cared for by washing with a hose.

There are hundreds of usable applications for all weather sound panels.  Note that Acoustiblok’s panels don’t just absorb sound, they block sound.  This is a unique feature that others try to duplicate.  Sadly, they don’t measure up to the quality of Acoustiblok extraordinary panels.  Out of all the tips that reduce industrial machinery noise, that’s the best tip of the day.